1. Brief introduction:
Waterman brand Chlorine Dioxide Generator is specially designed for water purification.
CPF-50XC is a new small wall-mounted chlorine dioxide generator which can produce ClO2 50g/h on-site by chemical reaction of raw materials, which is to adjust dosage of clo2 by manual. It can add ClO2 solution into the pressured water directly with simple, safe and reliable operation. The clients can install and debug the disinfection system by themselves in accordance with instruction manual which provided by the factory.
2. Characteristics: optimized structural design, good materials choice, good quality, low cost, easy to install and debug, safe and reliable operation and good applicability.
3. Two chemicas process:
Sodium Chlorite: 18.5% Industrial Sodium Chlorite solultion
Hydrochloric Acid: 15% Industrial Hydrochloric Acid
More ratios are available
4. Technology:
Use sodium chlorite and hydrochloric acid as raw materials, transmission in proportion of raw materials through two metering pumps to the reactor, in which produce quantitative chlorine dioxide solution to add to water for disinfection. The dosage of clo2 can be adjusted manually.
5. Main parameters:
Capacity: 50g/h
Working convironment conditions:
Operating voltage: AC220V plus or minus 10%/1.2KW
Working temperature: 5 ~ 40 degrees Celsius
Relative humidity: 80%
Require a strong anti-interference ability.
Maximum pressure of water-pipe-line: <0.4MPa
Functions and signals:
Work in step with water pump: AC220V
Manual control
Low liquid level alarm of raw materials / failure alarm and stop for dosing pumps
Remote start / stop
Timing start / stop